Middle East Jobs, Careers, Vacancies

Senior Piping Engineer, Rejlers International Engineering Solutions, Abu Dhabi, UAE

Rejlers International Engineering Solutions AB operates in Abu Dhabi, UAE, and delivers high-quality engineering and project services to Oil & Gas, Refining, Petrochemical, and Chemical Industries mainly in UAE and other Arabian Gulf Countries. This year the Company has been operating in UAE for 10 years and its parent company has been in business for almost 80 years. We share a strong Nordic Engineering heritage of high-quality and frontline innovations.

We are now looking for Senior/Lead Piping Engineer to execute projects and support bids in Abu Dhabi, UAE.

Reports To

The Senior/Lead Piping Engineer, reports to Line Manager, Layout and Piping.

Job Overview

The Senior/Lead Piping Engineer is responsible for handling engineering design review and analysis assignments normally involving a major project or several smaller or less complex projects. These projects by nature of their complexity and difficulty require the fully competent application of conventional knowledge in oil & gas.

In your role, you will lead and execute piping engineering projects in a safe manner, budget, schedule, and quality.

You should have a desire to work on multi-discipline local as well overseas projects and be able to drive discipline goals by working together with the assigned discipline designers and engineers.

Senior/Lead Piping Engineer shall be technically qualified (Bachelor Degree in Engineering with 15 years’ minimum Oil & Gas experience and Min. 8 years in senior role) in discipline Piping, 2D/3D CADD systems, specifically in Engineering Designs and interdisciplinary layout preparation utilizing the 2D/3D Modeling techniques.

Hunger for learning and sharing new ideas will be the cornerstone of your success. We also value people for whom safety is part of their professional skills.

Responsibilities and Duties

Act as lead and interact with the project engineering manager for solving technical problems arising during project development

Ability to review Client's technical documentation and requirements, interpret topographical and geotechnical survey inputs, carry out detailed site surveys, verification, and data collection;

Able to do lay-out study, tie-in, feasibility study, design basis, independently able to develop piping deliverables, the scope of work, work definitions, piping specifications, datasheets, requisitions, piping engineering calculations, technical bid evaluation, vendor document review, MTO

Must have good knowledge of ASME 31.3 and extensive experience with ADNOC / Shell DEP standards

Must have good knowledge and understanding of piping drawings (layouts, GAD’s, isometrics, plot plan).

Able to organize inputs and supervise for preparation of piping drawings, support design, material take-offs, calculations, material specifications, datasheets, and material requisitions as per ASME 31.3

Mandatory software skills in Microstation, and ACAD, CAESAR-II and all other necessary software to perform duties as Lead Piping Engineer.

Should be able to carry out stress analysis independently and shall be able to lead a group of Stress Analysts.

Understand the interface within the multi-discipline project

Should take full responsibility for proper and timely execution of project deliverables ensuring full compliance with the quality management system and any project-specific contractual requirements.

Ensures effective communications among other engineering disciplines and project management teams.

Coordinate with members of the piping discipline, other engineering disciplines within the organization or project team as well as with Clients, third parties, vendors, etc.

Participates in progress review meetings and be aware of project status, progress, delays, change notices, performance measurement, lessons learned, and close-out.

Ability to prepare documents for piping related workshops such as model reviews for lay-out and actively participate in the same

Assumes responsibility for cost, schedule, material quantity, and budget control

Takes personal responsibility for safety and a healthy environment on the projects

Is able to produce proposals for projects which involve man-hour and schedule estimates for piping discipline

Should be able to add value plus/ optimization ideas

Cooperating with other engineering disciplines, customers and subcontractors locally or overseas

Able to do Technical Bid Evaluations of selected Vendor Offers

Check the piping engineering deliverables created by designers and draughters

Qualifications

Engineering Graduate (BEng, BSc. or MSc.) in Mechanical or Technical related degree.

Minimum of 15 years relevant engineering experience in Piping Engineering ASME B31.3.

Minimum of 8 years in a senior role

Good leadership and coordination, analytic and pro-active approach competence in the Oil & Gas, Petrochemical and Chemical Industries.

Willingness to overcome challenges and pressure during the peak of the project.

Willing to do extensive site-surveys during project execution.

UAE local experience is added value.

Excellent interpersonal and communication skills

Fluent in the English language

Shares the company values of teamwork, transparency, honesty, and equality

Team player, hardworking, problem solver and have a can-do attitude

Meets UAE visa requirements

Our work is guided by our vision: Home of the learning minds. We believe in continuous learning and development. We want to succeed both as individuals and as a company through a common goal: success through continuous learning.

Do you want to join us?

Please apply at once as we proceed with suitable candidates as soon as possible. Submit your application, CV, and salary expectation latest by 29th May 2022.

https://career.rejlers.fi/jobs/1780342-senior-piping-engineer

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Join a Whatsapp Group of your choice, to be notified of the Latest Jobs in the Middle East:

https://www.dubai-forever.com/whatsapp-jobs.html

🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼

Create a new CV to apply for jobs in the Middle East (GCC):

1. Applicant Tracking System (ATS) - compliant CV. This CV is used for online applications on job sites. ATS is the software that reads and stores your CV in a database.

2. Visual/ Infographic CV. This CV is normally sent to recruiters by email. It is visually - appealing. It may not be compliant to the ATS.

To know more about ATS and Infographic CV read here:

https://www.dubai-forever.com/cv-writing-services.html#ATS-Compliant-CV

Please do submit your CV here as well:

🔊 https://www.dubai-forever.com/submit-your-cv.html

Join the Fastest Growing Jobs Group on LinkedIn:

🔊 https://www.linkedin.com/groups/8288711/

View our Youtube Channel:

🔊 https://www.youtube.com/channel/UC3f1M0lYhy7e6TT_nWq9HSQ

Join our Telegram Group:

🔊 https://t.me/gccjobvacancies

Laboratory Technician I, Core Laboratories, Abu Dhabi, UAE

LABORATORY TECHNICIAN I

JOB SUMMARY

Performs routine laboratory tests under close supervision to determine chemical or physical characteristics designated by the client.

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.

Receive and log field samples. Assist in general lab activities.
Read and understand all analysis and safety standards in English, including ASTM, UOP, and IP.
Assist senior laboratory personnel in setting up, adjusting and operating laboratory equipment for which the technician has been adequately trained and has been verified to operate correctly in accordance with applicable standards and sound laboratory practice.
Assist in or perform basic analytical tests from well-defined standards and procedures as assigned by the Laboratory Manager. Clean and sterilize laboratory equipment.
Prepare chemical solutions according to standard formulas. Understand and be able to complete laboratory raw data sheets and make accurate entries into laboratory computer programs.

QUALIFICATION REQUIREMENTS

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with certain disabilities to perform the essential job functions when safety is not compromised.

EDUCATION AND/OR EXPERIENCE

A high school graduate or equivalent required. Bachelor of Science degree preferred and at least two years of related experience and/or training; or equivalent combination of education and experience.

LANGUAGE SKILLS

Ability to read, analyze and interpret instructional and technical materials relating to procedures and safety; and applicable government regulations. Ability to write applicable reports and correspondence clearly. Ability to effectively present information and respond to questions from managers, schedulers and clients in English. Arabic is a plus.

MATHEMATICAL SKILLS

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, percent, and quantities (linear, volumetric, or weight) and to read and interpolate applicable data and tables. Able to draw and interpret applicable graphs and control charts.

REASONING ABILITY

Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule formats.

OTHER SKILLS AND ABILITIES

Familiarity with basic computer skills in word processing and spreadsheet programs is helpful but not required; however Laboratory Technicians must possess the capability to learn these applications through instruction provided by ProTechnics.

PHYSICAL DEMANDS

The physical demands described here are representative, but not necessarily all-inclusive, of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with certain disabilities to perform the essential functions when safety is not compromised.

Physical Qualifications for Petroleum Laboratory technicians:

ProTechnics requires laboratory technicians to meet the following physical qualifications
Pass the drug test specified by ProTechnics for safety-sensitive employees.
Be able to work in the presence of odors typical of petroleum or petrochemicals without allergic reactions or nausea, when such odors are within OSHA-designated permissible exposure limits (PELs).
While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; talk or hear; and test or smell. The employee frequently is required to walk, sit, and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch, or crawl.
Laboratory personnel must regularly lift or move up to 10 pounds and occasionally lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and the ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions when safety is not compromised.

While performing the duties of this job, the employee may be exposed to fumes, airborne particles, and toxic or caustic chemicals. ProTechnics provides product information, training, engineering controls, and personal protective equipment in an effort to protect employees from exposure to potentially harmful levels of those materials. Employees are required to read product information, use available engineering controls, follow guidelines presented during training, and be able to wear and use appropriate protective equipment, including respiratory protective equipment, as may be required by the work environment.
The noise level in the work environment is usually moderate.

Assist senior laboratory personnel in setting up, adjusting and operating laboratory equipment for which the technician has been adequately trained and has been verified to operate correctly in accordance with applicable standards and sound laboratory practice.
Assist in or perform basic analytical tests from well-defined standards and procedures. Laboratory technicians must be verified to be able to perform all tests in accordance with applicable standards and sound laboratory practice.
Clean and sterilize laboratory equipment.
Assist in calibrating laboratory instruments for which the technician has been adequately trained and has been verified to operate correctly in accordance with applicable standards and sound laboratory practice.
Prepare chemical solutions according to standard formulas.
Exercise procedural, safety and quality requirements specified in laboratory and safety manuals and company policies.
Attend training and pass appropriate examinations in petroleum, chemical and gas analysis, including Right-to-Know training, hazardous materials disposal, and other safety and compliance training required by applicable regulations.
Understand and be able to complete laboratory raw data sheets and make accurate entries into laboratory computer programs.
Attend regular safety meetings

Qualifications:

High school diploma or GED required
At least one-year related laboratory experience and/or training preferred
Ability to use Microsoft Office (Excel, Word, and Access).
Ability to read and follow basic methods and safety standards, including ASTM, UOP, IP and other well-defined analytical standards and procedures used in the laboratory.
Ability to write basic routine reports and correspondence.
Ability to speak professionally with customers or employees of organization.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, percent, and quantities (linear, volumetric, or weight) and to read and interpolate applicable data and tables. Able to draw and interpret applicable graphs and control charts.
Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.

Other Information:

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to sit; use hands to handle or feel; and talk or hear. The employee is required to stand and walk. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently exposed to moving mechanical parts, fumes, or airborne particles, and toxic or caustic chemicals. The employee is occasionally exposed to extreme cold and non-environmentally controlled storage areas. The noise level in the work environment is usually moderate.

WORK SCHEDULE:
Requires the ability to work a non-traditional work hours/days schedule, including overtime.

https://corelab.csod.com/ux/ats/careersite/1/home/requisition/2888?c=corelab