Lead Mechanical Engineer (O&G, Mechanical Equipment - Static & Rotary), NOV, Dubai, UAE

This job is OPEN for ALL Nationalities to Apply, unless otherwise specified.

Read the Job Description carefully, then scroll down for "Details to Register for this Job"...

Job Description

NOTE: Please ONLY apply if you have sufficient experience and skills required as per job description below. 

JOB SUMMARY

Responsible for the technical integrity of assigned Mechanical Engineering activities.

Responsible for quality defined in quality management system in general as well as according to governing rules, regulations, standards, specifications and or procedures.

Independent responsibility for the professional execution of the work assigned to the team.

Contribute to efficient execution in compliance with the Project schedule.

Performance targets for the year to be established in Q1 every year as per instructions from NOV and managed through standard business processes and described in the performance tool.

Execute projects with quality and cost-effective engineering deliverables, according to company directives and instructions, within laws, rules, and regulations.

Participate and adhere NOV team strategy as well as business objectives set by NOV.

Participate in package-specific tests and inspections as agreed with Project Quality Manager (PQM)

JOB RESPONSIBILITIES:

HSEQ

The Engineer shall on own initiative:

Take personal responsibility for HSE by focusing on own behavior.

Ensure that own work follows Company requirements for HSEQ.

Contribute to continuous improvement of quality and safety of our products and deliveries.

Tasks and Responsibilities (not exhaustive) 

The Engineer shall on own initiative:

Pursue professional development within own discipline/area,

Report deviations, suggest improvements to the company QM system.

Proactively work to continuously improve the company and its operations by LL initiatives.

General technical assignments as requested by the project management.

Design, drawing and model review.

Budget analysis, Resource Deployment, Resource management 

Development of specifications and other engineering documentation,

Interface with subcontractors, suppliers, vendors,

General tasks related to procurement support, documentation, reporting, etc.

Training and experience transfer of other less experienced engineering personnel.

Technical Requisition (owner)

Equipment Datasheet for Inquiry and Purchase Order (owner)

Technical Bid Evaluation (TBE) (owner)

originate, drive resolution, and coordinate the clarification logs with Bidders – Technical Deviations and Clarifications (TD&C) – one per Bidder. (owner)

Prepare a documented Recommendation for Award (RfA) based on TBE and TD&C’s (owner)

Supplier deliverables - for each of them: review, collect and check other disciplines’ comments, prepare mark-up, decide, and stamp the status code on the document; fill in and file relevant check lists as applicable.

Critically analyze comments received from Client and advise the project team regarding potential extra-contractual requirements or scope variations.

Drive and coordinate closure of punch lists.

Reporting and Communication 

The Engineer shall on own initiative:

Reporting in project to the Lead Engineer / Engineering Manager and Project Manager.

Report any non-compliance with HSEQ requirements to the Team Manager.

Interact with the Engineer Manager regarding technical and project related challenges.

Methods of Work

Ensure that relevant working methods are followed.

Perform tasks in such a way as to reduce environment and health risks.

Ensure tasks performed are to a high quality, be involved in and suggest improvements where they may be needed.

Participate in the evaluation of working methods and conditions thereby minimize the risk for workplace and environmental incidents and thereby minimize the risk for quality issues.

Ensure processes are performed in compliance with internal and external requirements, defined and documented, continually measured, evaluated, improved and secured.

Be proactive and Manage schedules and work to tight deadlines.

Subordinates, peers and leadership.

Actively participate in the appraisal process, ensuring objectives are entered into the system and are reviewed on time as required.

Work closely with peers to reach the common and shared goals for NOV.

FACILITY SPECIFIC RESPONSIBLITIES:

Preparation of Mechanical Datasheets, Material Requisition, Technical Bid Evaluation, Feasibility Evaluation, Mechanical Equipment Design and drawings,

Input sketches for drafts man/ 3D modeling designer and datasheet

Detail Engineering knowledge of Vessels internals & Detailed Engineering knowledge of rotating equipment and associated accessories lube oil system, fuel gas system, CIP system and associated electrical items interfaces & instrument items interfaces. 

Detail Engineering, Analysis and calculations,

Development of specifications and other engineering documentation,

Interface with subcontractors, suppliers, Vendor Management

BEHAVIORAL SKILLS/COMPETENCIES REQUIRED

Communication, people management, analytical and coordination skills.

Engineer shall have good interface knowledge with other disciplines especially Process, Piping, Electrical & Instrumentation etc. and knowledge of all discipline documents and drawings is required.

Good Knowledge of International Mechanical Codes and Standards like ASME SEC.VIII DIV.1 / DIV.2, TEMA, PD5500, API:650, API:660, API:661, ASME, API etc. applicable to Rotary Equipment - API 610, API 674, API 675, API 676, API 617, API 618, API 619, API 672 etc. 

Review designs & plans, layouts, working drawings and managing resources to ensure execution of projects within time and budgeted parameters.

Monitor closely the fast-track projects and meet the project deadline on time.

Deftness in swiftly ramping projects in coordination with clients, consultants & contractors.

Allocating tasks to Team Lead & Technical Expert on abroad site for technical support if required.

Evaluating Equipment design progress & development 

Exposure in Equipment design calculation and FEA 

Proven technical experience in Static Equipment Engineering with extensive skills using essential pressure vessel design softwares such as Pv-Elite, Compress, TANK, etc

Exposure in Layout development and Skid based designs. 

Equipment handled should cover material of construction of CS, LTCS, SS, CS+Clad, LAS, HAS, NACE MR0175, HIC etc. for applications with temperature ranging from hot service to cryogenic with special services like Hydrogen, Lethal, Wet Sour, Cyclic, Sea Water etc.

Standardization of Design Procedures and review Check list and Design Guidelines

EDUCATION/ EXPERINCE REQUIRED 

Essential:

Bachelor’s Degree /Post graduate degree in Mechanical Engineering or equivalent degree from recognized university.

Min 15+ years relevant experience in Mechanical Engineering from Oil and Gas industry (Upstream & Downstream).

SKILLS/ TRANING REQUIRED:

Support the Lead Engineer / Engineering Manager in development and implementation of the Strategy outlined for the Mechanical Engineering Department. 

Good knowledge in Equipment Design (Static & Rotary)

Review project design basis and specifications to ensure integrity in-line with project requirement.

Evaluation of vendor offers, Raising TQs, Preparation of Technical Bid Evaluation and Post order vendor documents review.

Participate in the supplier tender process including development of scope, input to the tender evaluation and clarification activities.

Preparation of Deliverable list & Schedule, Man-hour estimate, Resource requirement and Progress report

Participating in Design Review and Progress Review meetings.

Evaluation / Review / Checking of Design Documents / Drawings

Communication, people management, analytical and coordination skills.

Engineer shall have good interface knowledge with other disciplines especially Process, Piping, Electrical & Instrumentation etc. and knowledge of all discipline documents and drawings is required.

Good Knowledge of International Mechanical Codes and Standards of both static and rotating Equipment.

Review designs & plans, layouts, working drawings and managing resources to ensure execution of projects within time and budgeted parameters.

Monitor closely the fast-track projects and meet the project deadline on time.

Deftness in swiftly ramping projects in coordination with clients, consultants & contractors.

Allocating tasks to Team Lead & Technical Expert on abroad site for technical support if required.

Evaluating Equipment design progress & development 

Exposure in Equipment design calculation and FEA 

Proven technical experience in Static Equipment Engineering with extensive skills using essential pressure vessel design software such as PV-Elite, Compress, TANK, etc.,

Exposure in Layout development and Skid based designs. 

Standardization of Design Procedures and review Check list and Design Guidelines.

DETAILS TO REGISTER FOR THIS JOB:

https://egay.fa.us6.oraclecloud.com/hcmUI/CandidateExperience/en/sites/CX_2001/job/24068

Also, Copy-Paste Your CV in the Comments section.



Applied For Many Jobs, But Didn't Get Any Interview Calls? Apply For This Job Using a Branded AI-compliant ATS-Friendly CV from Dubai-Forever.Com.





What is an ATS CV?

Applicant Tracking System or "ATS", is the software that 'READS' your CV and stores this information in a database. Like this:



If the CV is not made as per the RULES of the ATS, the information will get messed up in the database. Like this:



And, you may never be found by the recruiter, in spite of your 'CV information' existing in the database...

...And, you'll keep wondering why you get rejected in spite of being a PERFECT MATCH for the Job.


Read more about the ATS CV:

https://www.dubai-forever.com/cv-writing-services.html#ATS-Compliant-CV


🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼


What's the most IMPORTANT thing you should read about a CV Writing Service?

Client Satisfaction Reviews, right?

You'll get a fair idea whether to purchase that service or not.

Read the recommendations our customers have written on my LinkedIn profile.

Click the LinkedIn banner below and then scroll down to the Recommendations section.

Navigate here for more testimonials/feedback about our expertise and results:

www.dubai-forever.com/resume-writing-feedback.html

www.dubai-forever.com/cv-writing-reviews.html


Also, read reviews about "www.Dubai-Forever.Com" on TrustPilot.com, the world's must trusted review site...


🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼


Want CV Samples & Templates for FREE?

Click on the CV's below to begin:





🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼


Join the Fastest Growing Jobs Group on LinkedIn:





🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼


Join the Middle East's Best Job Groups on Whatsapp:





🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼


Join our Telegram Group:





🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼


Submit your CV here, as well:





🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼


We support the Far-Sighted, Growth Oriented Vision announced by the UAE, Saudi Arabia, Qatar, Oman, Kuwait and Bahrain.


It's an exciting time and the next 30 - 40 years will be those of the GCC countries.


Excited about working in the GCC? Click on one of the banner's below...






🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼

SOCIAL INITIATIVE:

We publish job vacancies on this website and our Whatsapp groups for the benefit of job-seekers.


It is to help people who are searching for jobs from across the world.


This is a Social Initiative from our team @ dubai-forever.com, so please help us in this Noble Task by Forwarding these jobs within your Network.


Do this GOOD DEED.


You never know who will benefit from it.


You've heard about KARMA right?


It's waiting to give you 10X of whatever you do...Do the Good Deed. NOW!


🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇦🇪 🇸🇦 🇶🇦 🇴🇲 🇧🇭 🇰🇼